Hoop Steel Ring Hoop Hoop Pipe Fitting Hardware

Steel rings are used to weld on threaded pipe or seamless pipe, with two pairs in each group. It is matched with clamp and rubber ring, and the material is relatively soft.
The use rate of steel ring is relatively high, the thickness is generally 10mm, and the diameter changes with the size of the clamp. There are national standards and can also be customized. The material is the material of threaded steel, and the width is between 20 ~ 25mm.The applicable maximum temperature is 600 degrees. Applicable pressure 2.0 mpa-42 MPA. Mainly used in valve flange joint, sealing performance is good.
In pipe installation, the hoop is usually clamped on the pipe and then fixed on a solid foundation. The hoop is also used in other installation projects. For example, the hoop is used to fix the cross arm on the Round Pole. The cross arm bears the tension and tension of the wire. In short, the hoop is used to hold the cylinder and fixed installation of the hardware.
Steel Ring is widely used in subway, coal mine, water power plant, etc. . Steel ring is used to connect water pipes, and then the use of Hoop and rubber ring fixed, can effectively prevent leakage.The disadvantage is that the cost is slightly higher. There are three types of manufacturing processes: casting, forging and steel.